Topographic Data Collection in Bartlesville, OK
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Washington County & the Northeast Oklahoma area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Bartlesville, OK
Low End
$1,000
High End
$2,500
Turnaround
2-3 days
Cost ranges are based on market data for Northeast Oklahoma. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Bartlesville
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Bartlesville. Here's what's driving demand:
Bartlesville is the historic headquarters of Phillips 66 Petroleum Company, and the energy sector remains the primary economic driver. The Phillips 66 Research Center continues to invest in facility upgrades and research infrastructure. Downtown Bartlesville features Frank Lloyd Wright's only skyscraper, the Price Tower, and ongoing historic preservation projects. Residential development in the east and south Bartlesville areas, including the Silver Lake Village development, generates steady data collection demand. The nearby ConocoPhillips operations also support commercial construction.
Major Developers Active in the Area:
Oklahoma drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Bartlesville meets all federal and state requirements.
Drone Regulations in Bartlesville, OK
Airports & LAANC Zones
- BVO — Bartlesville Municipal Airport (Class E airspace, northwest of city center)
- TUL — Tulsa International Airport (Class C airspace, ~45 mi south)
- MKO — Muskogee-Davis Regional Airport (Class E airspace, ~50 mi southeast)
Restricted Airspace
- Bartlesville Municipal Airport (BVO) operates in Class E airspace with no control tower. While LAANC is not required for Class E surface area, FAA Part 107 operators must still notify the airport when flying within 5 miles. The airport hosts general aviation and corporate traffic serving Phillips 66 and ConocoPhillips facilities.
- The Phillips 66 Research Center and Phillips 66 corporate campus have security-restricted airspace considerations. While not formally designated restricted airspace, the Department of Homeland Security and facility security may require notification for drone operations near critical energy infrastructure.
- The Woolaroc Museum and Wildlife Preserve has local restrictions during outdoor events and for wildlife protection. Contact Woolaroc management before any aerial mapping work on or near the preserve.
- The Caney River corridor has temporary restrictions during flood control operations by the U.S. Army Corps of Engineers. Check with the Tulsa District Corps for any active restrictions.
Local Ordinances
The City of Bartlesville requires a commercial use permit for drone operations in city parks and public facilities. Operations on private property require owner permission and FAA Part 107 compliance. Bartlesville Municipal Code prohibits drone takeoff or landing from city streets and sidewalks without prior approval. The Phillips 66 corporate campus requires coordination with facility security for any drone operations on or adjacent to company property.
All drone operations in Bartlesville must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Bartlesville airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Bartlesville, OK
How much does a drone topographic data collection cost in Bartlesville?
Drone topographic data collection projects in Bartlesville typically range from $1,000 to $2,500 with 2-3 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Bartlesville, OK
What are the airspace restrictions for drone flights near the Phillips 66 Research Center in Bartlesville?
While the Phillips 66 Research Center is not in formally restricted airspace, it is critical energy infrastructure. The Department of Homeland Security and facility security may require notification for drone operations near the facility. Bartlesville Municipal Airport (BVO) operates in Class E airspace with no control tower, so LAANC is not required, but FAA Part 107 operators must still notify the airport when flying within 5 miles. Always coordinate with Phillips 66 security for operations on or adjacent to company property.
How much does an aerial imaging cost in Bartlesville?
Topographic data collection projects in Bartlesville typically range from $1,000 to $2,500. LiDAR scanning runs $1,800-$4,500. Roof inspections cost $150-$350. Construction monitoring packages start at $500 per month. Bartlesville pricing is slightly below the Tulsa metro, reflecting the regional market. Energy-sector facility data collection projects and residential development work are the most common data collection types.
Can I fly a drone near the Price Tower in downtown Bartlesville?
The Price Tower area in downtown Bartlesville does not have formal airspace restrictions, but FAA Part 107 regulations apply to all commercial drone flights. Operations over people require compliance with Part 107 subpart D (Category 1-4 drone operations). The Price Tower Arts Center and downtown business district may require local coordination for takeoff and landing locations. Avoid flying directly over crowds during downtown events.
What construction projects are driving aerial imaging demand in Bartlesville?
Phillips 66 Research Center facility upgrades, downtown historic preservation projects, Silver Lake Village residential development, Bartlesville Public Schools bond construction, and Jane Phillips Medical Center expansion are the primary drivers. Energy infrastructure maintenance and inspection also generate specialized data collection demand.
Is Bartlesville a good market for energy sector aerial imaging services?
Bartlesville is an excellent market for energy-sector aerial imaging projects due to its history as the Phillips 66 headquarters. Pipeline inspection, facility monitoring, tank inspection, and environmental compliance data collection projects are in demand. The presence of both Phillips 66 and nearby ConocoPhillips operations creates a concentrated energy infrastructure corridor. Operators with energy-sector experience and FAA Part 107 certification have a strong advantage in this market.
Do I need a permit to fly a drone in Bartlesville city parks?
Yes. The City of Bartlesville requires a commercial use permit for drone operations in city parks and public facilities. Applications are processed through the Parks and Recreation Department. Operations on private property require owner permission and FAA Part 107 compliance. Drone takeoff or landing from city streets and sidewalks requires prior approval from the city.
All Aerial Imaging Services in Bartlesville, OK
Compare pricing across all aerial imaging services available in Bartlesville, Oklahoma.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,000 | $2,500 | 2-3 days |
| Drone Inspection | $175 | $400 | 1-2 days |
| LiDAR Scanning | $1,800 | $4,500 | 3-5 days |
| Environmental Monitoring | $500 | $1,600 | 2-3 days |
| Aerial Imagery | $100 | $250 | 1-2 days |
| Construction Monitoring | $500 | $1,500 | Monthly |
| Real Estate Photography | $100 | $250 | 1-2 days |
| Roof Inspection | $150 | $350 | 1-2 days |
Pricing ranges are based on market data for Northeast Oklahoma. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Bartlesville, OK
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Bartlesville, OK?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Bartlesville and the surrounding Northeast Oklahoma area.
Apply to Join