Topographic Data Collection in Biloxi, MS
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Harrison & the Gulfport-Biloxi-Pascagoula Metropolitan Area area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Biloxi, MS
Low End
$1,300
High End
$5,200
Turnaround
1-2 weeks
Cost ranges are based on market data for Gulfport-Biloxi-Pascagoula Metropolitan Area. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Biloxi
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Biloxi. Here's what's driving demand:
Biloxi is the Gulf Coast casino resort capital of Mississippi, with a construction market driven by gaming industry expansion, hurricane resilience construction, and military infrastructure at Keesler AFB. The beachfront US-90 corridor hosts major casino resorts including Beau Rivage, IP Casino Resort, and Hard Rock Hotel and Casino, each undergoing periodic expansion and renovation requiring site data collection projects and construction monitoring. Hurricane Katrina recovery and subsequent storm resilience standards (IBC wind load requirements for coastal Zone V) drive specialized construction and inspection demand. The Department of Defense continues investing in training facility construction at Keesler AFB, creating steady federal construction monitoring opportunities. Residential development in north Biloxi and the D'Iberville area has accelerated as population returns to the coast. The Biloxi Bay Bridge and I-10 corridor infrastructure projects require right-of-way aerial imaging and aerial monitoring.
Major Developers Active in the Area:
Mississippi drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Biloxi meets all federal and state requirements.
Drone Regulations in Biloxi, MS
Airports & LAANC Zones
- GPT — Gulfport-Biloxi International Airport (Class D airspace, commercial, 10 NM west)
- BIX — Keesler Air Force Base (Class D airspace, military, within city limits)
- M72 — Ocean Springs Airport (Class E, general aviation, 5 NM east)
Restricted Airspace
- [object Object]
- [object Object]
- [object Object]
- [object Object]
- [object Object]
Local Ordinances
Biloxi falls within the FAA LAANC coverage area for both Keesler AFB (BIX) and Gulfport-Biloxi International Airport (GPT) Class D airspace. The city does not have a dedicated municipal drone ordinance, but Harrison County park regulations prohibit drone takeoff and landing in county parks without a permit. The beachfront area along US-90 is managed by the Mississippi Department of Marine Resources (MDMR), which requires notification for commercial drone flights over the sand beach and public access areas. Drone operations near Keesler AFB require coordination with Keesler Tower, and military security zones may be active during training exercises. Casino resort properties are regulated by the Mississippi Gaming Commission — coordinate with property management before any aerial work. Hurricane evacuation zones cover the entire city. Contact Biloxi City Hall at (228) 435-7000 for municipal permits.
All drone operations in Biloxi must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Biloxi airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Biloxi, MS
How much does a drone topographic data collection cost in Biloxi?
Drone topographic data collection projects in Biloxi typically range from $1,300 to $5,200 with 1-2 weeks turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Biloxi, MS
Do I need FAA airspace authorization to fly a drone in Biloxi?
Yes, and the requirements are stricter than most cities. Keesler Air Force Base (BIX) has a Class D airspace ring directly within Biloxi city limits covering the casino corridor and central city. Gulfport-Biloxi International Airport (GPT) has a Class D ring 10 NM west that extends into western Biloxi. Commercial drone operators must check both BIX and GPT LAANC grids and obtain authorization before any flight. Contact Keesler Tower for military airspace sectors not covered by LAANC. The overlapping Class D zones mean nearly all of Biloxi requires airspace authorization.
Can I fly a drone over the beach and casino resorts in Biloxi?
The beachfront sand beach along US-90 is managed by the Mississippi Department of Marine Resources (MDMR), which requires notification for commercial drone flights. Casino resort properties are regulated by the Mississippi Gaming Commission — coordinate with property management before any aerial work over casino buildings or parking areas. Drone flights over crowds during events, concerts, and Mardi Gras parades are prohibited under FAA Part 107.39 without specific waivers. Always check for TFRs during festivals and hurricane evacuation orders.
Are there restrictions on flying drones near Keesler Air Force Base?
Yes, extensive restrictions. Keesler AFB (BIX) is located directly within Biloxi city limits with its own Class D airspace ring covering much of the city. The base is a major Air Force technical training installation conducting daily T-6 Texan II and T-1 Jayhawk training flights. An extended military operations area covers the Biloxi Back Bay area. Drone flights near the base perimeter require coordination with Keesler Tower. Always check NOTAMs for military training activity and avoid the Keesler Class D ring entirely unless explicitly cleared by ATC.
What construction projects in Biloxi typically need drone aerial imaging?
Casino resort expansions and renovations along the US-90 beachfront corridor are the primary commercial construction market, requiring site data collection projects, construction monitoring, and roof inspections for large-scale buildings. Keesler AFB military construction projects provide steady federal-compliant aerial mapping work. Hurricane resilience construction including storm-hardened building upgrades, beachfront restoration, and infrastructure hardening requires specialized inspection for insurance and FEMA documentation. Residential development in north Biloxi and D'Iberville generates topographic data collection demand.
Can I fly a drone over the barrier islands visible from Biloxi?
No. The barrier islands south of Biloxi — Ship Island, Horn Island, and Petit Bois Island — are part of Gulf Islands National Seashore, managed by the National Park Service. The NPS prohibits drone takeoff and landing within all National Seashore boundaries. Aerial data collection of these areas requires special NPS research permits and coordination with the park superintendent. The islands are visible from the Biloxi coastline but are off-limits for routine commercial drone operations.
How does hurricane risk affect aerial imaging operations in Biloxi?
Biloxi sits in a high-risk hurricane zone on the Gulf Coast, and the construction market is deeply tied to storm recovery and resilience construction. During active hurricane evacuation orders, all drone flights are prohibited. Post-hurricane damage assessment aerial imaging is in high demand but requires coordination with emergency management authorities. Storm-hardened construction standards under IBC wind load requirements for coastal Zone V drive specialized inspection needs for insurance claims and FEMA documentation. Roof inspections are particularly in demand after storm season.
All Aerial Imaging Services in Biloxi, MS
Compare pricing across all aerial imaging services available in Biloxi, Mississippi.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,300 | $5,200 | 1-2 weeks |
| Drone Inspection | $850 | $3,600 | 3-7 days |
| LiDAR Scanning | $2,400 | $9,500 | 1-2 weeks |
| Environmental Monitoring | $1,600 | $6,200 | 1-2 weeks |
| Aerial Imagery | $650 | $2,600 | 2-5 days |
| Construction Monitoring | $1,100 | $4,500 | Weekly |
| Real Estate Photography | $350 | $1,400 | 2-3 days |
| Roof Inspection | $400 | $1,600 | 1-3 days |
Pricing ranges are based on market data for Gulfport-Biloxi-Pascagoula Metropolitan Area. Actual costs depend on project scope, site conditions, and required deliverables.
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Biloxi, MS?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Biloxi and the surrounding Gulfport-Biloxi-Pascagoula Metropolitan Area area.
Apply to Join