Topographic Data Collection in Cedar City, UT
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Iron County & the Cedar City Micropolitan Area area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Cedar City, UT
Low End
$1,400
High End
$6,500
Turnaround
2-4 days
Cost ranges are based on market data for Cedar City Micropolitan Area. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Cedar City
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Cedar City. Here's what's driving demand:
Cedar City is a regional hub for southwestern Utah. Construction is driven by Southern Utah University campus expansion, the Iron County School District, healthcare facilities at Cedar City Hospital, and residential development. The city serves as a gateway to Brian Head ski resort and Cedar Breaks National Monument, creating tourism infrastructure demand. The city has a growing manufacturing and industrial sector in the Cedar City Industrial Park.
Major Developers Active in the Area:
Utah drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Cedar City meets all federal and state requirements.
Drone Regulations in Cedar City, UT
Airports & LAANC Zones
- [object Object]
Restricted Airspace
- Class D airspace around Cedar City Regional Airport (CDC)
- Dixie National Forest flight restrictions to the north and east
- proximity to Zion National Park no-drone zone to the south (distance)
- Open high desert terrain with minimal restrictions beyond airport
Local Ordinances
Cedar City follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The Dixie National Forest to the north and east requires US Forest Service permits for commercial flights. Zion National Park is to the south but distant enough that most Cedar City operations are unaffected.
All drone operations in Cedar City must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Cedar City airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Cedar City, UT
How much does a drone topographic data collection cost in Cedar City?
Drone topographic data collection projects in Cedar City typically range from $1,400 to $6,500 with 2-4 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Cedar City, UT
What drone services are most needed in Cedar City?
Southern Utah University campus expansion creates institutional construction monitoring demand. Cedar City Hospital expansion requires healthcare facility data collection. Residential development requires topographic data collection and progress monitoring. The Cedar City Industrial Park creates manufacturing facility construction data collection needs. Tourism infrastructure for Brian Head and Cedar Breaks provides seasonal commercial data collection work.
Does Cedar City have controlled airspace?
Cedar City Regional Airport (CDC) has Class D airspace. Drone operators flying within the Class D radius need LAANC authorization. The airport serves commercial flights and general aviation.
Can I fly a drone near Cedar Breaks National Monument?
Cedar Breaks National Monument, approximately 25 miles east of Cedar City, is managed by the National Park Service. Drone operations are prohibited within the monument boundaries without a special use permit. The monument is at high elevation (over 10,000 feet) and the access road is seasonal.
How does Cedar City elevation affect drone flying?
Cedar City sits at approximately 5,800 feet elevation. The high elevation significantly reduces drone lift capacity and battery life. The surrounding mountains, including the Markagunt Plateau, rise above 10,000 feet. Winter temperatures frequently drop below freezing. The Brian Head ski area nearby is at over 9,000 feet, making drone operations there extremely challenging.
Does Cedar City have its own drone ordinances?
No. Under Utah state law SB 167 (2019), only the state may regulate drone flight paths, preempting local municipalities. Cedar City follows FAA Part 107 regulations without additional local drone-specific ordinances.
What makes Cedar City unique for aerial imaging?
Cedar City is a regional hub for southwestern Utah, serving as a gateway to multiple national parks and monuments. The university, healthcare, and industrial sectors create diverse construction monitoring demand. The high elevation creates operational challenges. The tourism gateway role creates seasonal commercial data collection and aerial photography demand for hospitality development.
All Aerial Imaging Services in Cedar City, UT
Compare pricing across all aerial imaging services available in Cedar City, Utah.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,400 | $6,500 | 2-4 days |
| Drone Inspection | $500 | $2,800 | 1-3 days |
| LiDAR Scanning | $2,300 | $11,000 | 4-6 days |
| Environmental Monitoring | $1,200 | $5,500 | 3-5 days |
| Aerial Imagery | $300 | $1,800 | 1-2 days |
| Construction Monitoring | $650 | $3,200 | 2-4 days |
| Real Estate Photography | $250 | $1,200 | 1-2 days |
| Roof Inspection | $300 | $1,500 | 1-2 days |
Pricing ranges are based on market data for Cedar City Micropolitan Area. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Cedar City, UT
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Cedar City, UT?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Cedar City and the surrounding Cedar City Micropolitan Area area.
Apply to Join