Topographic Data Collection in Clinton, UT
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Davis County & the Ogden-Clearfield Metropolitan Area area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Clinton, UT
Low End
$1,700
High End
$7,500
Turnaround
3-5 days
Cost ranges are based on market data for Ogden-Clearfield Metropolitan Area. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Clinton
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Clinton. Here's what's driving demand:
Clinton is a growing Davis County suburb between Clearfield and Sunset. Construction is driven by residential subdivision development, commercial corridor projects along 1800 North and 2000 West, and the Clinton City Center area. The city has ongoing residential development expanding westward. The Hill AFB proximity creates military support facility demand.
Major Developers Active in the Area:
Utah drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Clinton meets all federal and state requirements.
Drone Regulations in Clinton, UT
Airports & LAANC Zones
- [object Object]
- [object Object]
Restricted Airspace
- Ogden-Hinckley Airport Class D airspace nearby
- Hill AFB restricted airspace to the south (distance)
Local Ordinances
Clinton follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths.
All drone operations in Clinton must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Clinton airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Clinton, UT
How much does a drone topographic data collection cost in Clinton?
Drone topographic data collection projects in Clinton typically range from $1,700 to $7,500 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Clinton, UT
What drone services are most needed in Clinton?
Residential subdivision development data collection and construction monitoring are primary demands. The Clinton City Center area development creates commercial data collection demand. Commercial corridor development along 1800 North provides additional data collection work.
Is Clinton in controlled airspace?
Clinton is near Ogden-Hinckley Airport Class D airspace. Check the LAANC grid for your specific location. Hill AFB restricted airspace is to the south but may not directly affect Clinton.
How does Clinton elevation affect drone flying?
Clinton sits at approximately 4,300 feet elevation in Davis County. The elevation reduces drone performance. Summer temperatures above 95 degrees compound the density altitude effect. The flat terrain offers few obstacles but no wind protection.
Does Clinton have its own drone ordinances?
No. Under Utah state law SB 167 (2019), only the state may regulate drone flight paths. Clinton follows FAA Part 107 regulations.
What makes Clinton unique for aerial imaging?
Clinton is a growing Davis County suburb positioned between Clearfield and Sunset. The residential development expanding westward and commercial corridor development provide steady data collection demand. The flat terrain and suburban character make aerial mapping operations straightforward with proper LAANC authorization.
How does Clinton compare to neighboring Clearfield for drone operations?
Clinton is adjacent to Clearfield but is further from Hill AFB restricted airspace, giving slightly more operating freedom. The residential character means less industrial data collection demand than Clearfield but more residential topographic data collection work. The airspace and elevation conditions are similar.
All Aerial Imaging Services in Clinton, UT
Compare pricing across all aerial imaging services available in Clinton, Utah.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,700 | $7,500 | 3-5 days |
| Drone Inspection | $550 | $3,200 | 1-3 days |
| LiDAR Scanning | $2,800 | $13,000 | 5-7 days |
| Environmental Monitoring | $1,400 | $6,500 | 3-5 days |
| Aerial Imagery | $350 | $2,200 | 1-2 days |
| Construction Monitoring | $750 | $4,200 | 2-4 days |
| Real Estate Photography | $300 | $1,800 | 1-2 days |
| Roof Inspection | $350 | $1,800 | 1-2 days |
Pricing ranges are based on market data for Ogden-Clearfield Metropolitan Area. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Clinton, UT
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Clinton, UT?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Clinton and the surrounding Ogden-Clearfield Metropolitan Area area.
Apply to Join