Topographic Data Collection in Longview, TX
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Gregg County & the Longview-Marshall area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Longview, TX
Low End
$1,800
High End
$4,500
Turnaround
3-5 days
Cost ranges are based on market data for Longview-Marshall. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Longview
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Longview. Here's what's driving demand:
Longview is the regional commercial hub of the East Texas oil and gas industry. The city serves as a service center for the Haynesville Shale natural gas formation and the East Texas Oil Field. Major construction includes pipeline infrastructure, oil and gas processing facilities, and industrial warehouse construction along I-20. The Longview Economic Development Corporation has been active in attracting manufacturing and logistics companies, including recent expansions at the Longview Business Park. Residential construction is steady, with the Spring Hill area and south Longview seeing new subdivisions. The city has maintained stable population growth to 82,000 residents.
Major Developers Active in the Area:
Texas drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Longview meets all federal and state requirements.
Drone Regulations in Longview, TX
Airports & LAANC Zones
- GGG — East Texas Regional Airport (Class E, 8 miles S)
- SHV — Shreveport Regional Airport (Class C airspace, 40 miles E)
- TYR — Tyler Pounds Regional Airport (Class D, 35 miles W)
- DFW — Dallas/Fort Worth International Airport (Class B airspace, 120 miles W)
Restricted Airspace
- East Texas Regional Airport (GGG) is Class E airspace — no LAANC required but pilots must notify the airport when operating within 5 miles.
- Class C airspace around Shreveport Regional (SHV) extends 20 nautical miles. The eastern edge of the Longview area may require LAANC authorization at higher altitudes.
- Class D airspace around Tyler Pounds Regional (TYR) — requires LAANC authorization within 4 nautical miles. TYR is 35 miles west.
- Longview city parks prohibit drone takeoff/landing without a special use permit. The Cargill Longview industrial area has active oil/gas service facilities.
Local Ordinances
Longview follows Gregg County regulations and FAA Part 107 rules. No city-specific drone permit is required for operations from private property. East Texas Regional Airport (GGG) is a Class E airport 8 miles south. The city is the commercial hub of the East Texas oil and gas industry, with pipeline inspection and industrial facility data collection projects being primary use cases. Longview parks prohibit drone takeoff/landing without a permit. The Haynesville Shale and East Texas Oil Field operations drive demand for pipeline and infrastructure aerial mappings.
All drone operations in Longview must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Longview airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Longview, TX
How much does a drone topographic data collection cost in Longview?
Drone topographic data collection projects in Longview typically range from $1,800 to $4,500 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Longview, TX
Do I need a permit for an aerial imaging in Longview?
No city-specific permit is required for commercial drone operations from private property in Longview. All flights must comply with FAA Part 107 rules. East Texas Regional Airport is 8 miles south, and pilots should notify the airport when operating nearby. Takeoff/landing in city parks requires a special use permit.
How much does an aerial imaging cost in Longview, TX?
Topographic data collection projects in Gregg County typically range from $1,800 to $4,500. Roof inspections run $200-$750. LiDAR scanning for pipeline corridors or industrial sites costs $2,800-$8,000. Pipeline inspection services start at $800. Real estate drone photography starts at $150.
Can I fly a drone near East Texas Regional Airport?
East Texas Regional Airport (GGG) is Class E airspace, so no LAANC authorization is required. However, pilots must notify the airport when operating within 5 miles. The airport has significant cargo and general aviation traffic. Our drone operators coordinate with GGG tower for safe operations.
What construction projects need aerial imaging projects in Longview?
Pipeline infrastructure construction, oil and gas processing facility expansion, Longview Business Park development, and residential subdivisions in Spring Hill and south Longview all require aerial mappings. The Haynesville Shale and East Texas Oil Field operations drive pipeline inspection demand.
How long does a topographic data collection take in Longview?
A standard 50-acre site can be flown in under an hour. Deliverables including DEM, contour maps, orthomosaic, and point cloud are ready within 3-5 business days. Pipeline corridor data collection projects may require multiple flights over several days. East Texas terrain is forested and rolling, requiring experienced pilots for canopy penetration.
All Aerial Imaging Services in Longview, TX
Compare pricing across all aerial imaging services available in Longview, Texas.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,800 | $4,500 | 3-5 days |
| Drone Inspection | $250 | $850 | 1-2 days |
| LiDAR Scanning | $2,800 | $8,000 | 5-7 days |
| Environmental Monitoring | $800 | $3,000 | 2-4 days |
| Aerial Imagery | $175 | $500 | 1-2 days |
| Construction Monitoring | $1,100 | $3,200 | Monthly |
| Real Estate Photography | $150 | $450 | 1-2 days |
| Roof Inspection | $200 | $750 | 1-2 days |
Pricing ranges are based on market data for Longview-Marshall. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Longview, TX
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Longview, TX?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Longview and the surrounding Longview-Marshall area.
Apply to Join