Topographic Data Collection in Redmond, OR
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Deschutes County & the Bend area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Redmond, OR
Low End
$800
High End
$2,800
Turnaround
3-5 days
Cost ranges are based on market data for Bend. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Redmond
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Redmond. Here's what's driving demand:
Redmond is the commercial airport hub for Central Oregon and a satellite of Bend. The city is experiencing rapid growth driven by tech industry expansion, data center development, and residential migration. The Redmond Airport Industrial Park has active industrial and commercial development. Data center development is a major market segment, with several large-scale facilities in the planning and construction phases. The downtown Redmond area has ongoing revitalization including the Redmond Corner project and SW 6th Street streetscape improvements. Residential construction is strong in the northwest and southeast growth areas, including the Ironhorse and Cline Falls developments. Infrastructure includes the Highway 97 Redmond bypass improvements, the Yew Avenue corridor project, and the RDM airport terminal expansion. The city is a hub for manufacturing, distribution, and aviation services. Les Schwab Tire Centers headquarters is in nearby Prineville but has operations in Redmond.
Major Developers Active in the Area:
Oregon drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Redmond meets all federal and state requirements.
Drone Regulations in Redmond, OR
Airports & LAANC Zones
- RDM - Redmond Municipal Airport (Class D, towered, adjacent to city, commercial and GA)
Restricted Airspace
- RDM (Redmond Municipal Airport) is Class D airspace with an operating control tower. LAANC authorization is required for commercial drone flights within the Class D area, which covers a 5-mile radius around the airport. The Class D surface area typically extends to 4,000 feet MSL. RDM is the commercial airport serving Central Oregon with flights to Seattle, San Francisco, Denver, and Phoenix. Check FAA UAS Facility Maps for specific altitude grids.
- The Deschutes River flows west of Redmond. The river has active recreational traffic including fishing, kayaking, and rafting. The river corridor has sensitive riparian habitat. Maintain visual line of sight and avoid flying directly over people on the river.
- Dry Canyon is a natural area running through the center of Redmond. The canyon has high pedestrian and bicycle traffic on the Dry Canyon Trail. Redmond Parks and Recreation requires permits for commercial drone takeoff and landing on park property. The canyon is a popular walking and running route.
- The high desert terrain around Redmond creates unique flying conditions. Summer temperatures regularly exceed 90 degrees Fahrenheit, which affects drone battery performance. Afternoon winds are common, especially in the spring and summer. The area is at approximately 3,000 feet elevation, which also affects drone performance.
- Wildfire season in late summer can create TFRs (Temporary Flight Restrictions) over nearby forest fires in the Deschutes National Forest. Check NOTAMs before flying during fire season. The surrounding juniper and sagebrush landscape is fire-prone from July through October.
Local Ordinances
Redmond requires a business license for commercial drone operations. Redmond Parks and Recreation requires a permit for commercial drone takeoff and landing in city parks, including Dry Canyon and Sam Johnson Park. The city prohibits drone operations that endanger public safety or violate privacy under Redmond Municipal Code 5.10. RDM Class D airspace covers much of Redmond requiring LAANC authorization. Oregon state law (ORS 837.300-.340) governs privacy protections and surveillance restrictions statewide.
All drone operations in Redmond must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Redmond airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Redmond, OR
How much does a drone topographic data collection cost in Redmond?
Drone topographic data collection projects in Redmond typically range from $800 to $2,800 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Redmond, OR
Do I need LAANC authorization to fly a drone in Redmond?
RDM (Redmond Municipal Airport) is Class D airspace with an operating control tower. LAANC authorization is required for commercial drone flights within the Class D area, which covers a 5-mile radius around the airport. RDM is the commercial airport serving Central Oregon. Check FAA UAS Facility Maps for specific altitude grids. Most of Redmond is within the Class D surface area.
What construction projects are driving aerial imaging demand in Redmond?
Data center development is a major market segment with large-scale facilities in planning and construction. The Redmond Airport Industrial Park has active industrial and commercial development. Downtown Redmond has ongoing revitalization including the Redmond Corner project. Residential construction is strong in the Ironhorse and Cline Falls developments. The RDM airport terminal expansion is a major infrastructure project. The Highway 97 Redmond bypass improvements are active.
How does Redmond's high desert environment affect drone operations?
Redmond sits at approximately 3,000 feet elevation in the high desert. Summer temperatures regularly exceed 90 degrees Fahrenheit, which affects drone battery performance. Afternoon winds are common, especially in spring and summer. The thinner air at this elevation reduces drone lift capacity. Wildfire season from July through October can create TFRs over nearby forest fires. Check NOTAMs before flying during fire season. The surrounding juniper and sagebrush landscape is fire-prone.
Can I fly a drone in Dry Canyon?
Dry Canyon is a natural area running through the center of Redmond with high pedestrian and bicycle traffic on the Dry Canyon Trail. Redmond Parks and Recreation requires permits for commercial drone takeoff and landing in city parks, including Dry Canyon. The canyon is a popular walking and running route. Avoid flying directly over trail users. Contact Redmond Parks and Recreation for permitting before planning flights.
How much does an aerial imaging cost in Redmond?
Topographic data collection projects in Redmond range from $800 to $2,800. LiDAR scanning costs $1,800 to $5,200. Construction monitoring runs $600 to $2,300. Redmond pricing is comparable to Bend, reflecting the Central Oregon market. Data center development, airport industrial park expansion, and residential construction drive strong demand for data collection and inspection services.
All Aerial Imaging Services in Redmond, OR
Compare pricing across all aerial imaging services available in Redmond, Oregon.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $800 | $2,800 | 3-5 days |
| Drone Inspection | $450 | $1,900 | 2-4 days |
| LiDAR Scanning | $1,800 | $5,200 | 4-8 days |
| Environmental Monitoring | $900 | $3,300 | 3-6 days |
| Aerial Imagery | $300 | $1,000 | 1-2 days |
| Construction Monitoring | $600 | $2,300 | 2-5 days |
| Real Estate Photography | $250 | $850 | 1-2 days |
| Roof Inspection | $230 | $850 | 1-2 days |
Pricing ranges are based on market data for Bend. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Redmond, OR
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Redmond, OR?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Redmond and the surrounding Bend area.
Apply to Join