Topographic Data Collection in Roseburg, OR
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Douglas County & the Roseburg area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Roseburg, OR
Low End
$800
High End
$2,800
Turnaround
3-5 days
Cost ranges are based on market data for Roseburg. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Roseburg
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Roseburg. Here's what's driving demand:
Roseburg is the county seat of Douglas County and the economic hub of the Umpqua Valley. The city is experiencing steady growth driven by healthcare expansion, timber industry, and retirement migration. Mercy Medical Center has facility expansion projects. The downtown Roseburg area has ongoing renovation and commercial improvement. The Harvard Avenue and Highway 99 commercial corridors have active development. Residential construction is strong in the northeast and southwest Roseburg areas. The Roseburg Forest Products headquarters is in the city and drives corporate facility needs. Infrastructure includes the Highway 99 and I-5 interchange improvements, the Garden Valley Boulevard corridor project, and the Roseburg Regional Airport improvements. The VA Southern Oregon Rehabilitation Center and Clinics campus has federal facility maintenance needs. The city is a hub for timber products, healthcare, and government services. The Umpqua Valley is an emerging wine region with vineyard development. The Umpqua National Forest and Bureau of Land Management lands surround the area.
Major Developers Active in the Area:
Oregon drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Roseburg meets all federal and state requirements.
Drone Regulations in Roseburg, OR
Airports & LAANC Zones
- RBG - Roseburg Regional Airport (uncontrolled, GA, 4 miles southwest, small GA)
- MFR - Rogue Valley International-Medford Airport (Class C, towered, 70 miles south, commercial and GA)
Restricted Airspace
- Roseburg is in Class G uncontrolled airspace at typical data collection altitudes. RBG (Roseburg Regional Airport) is uncontrolled with no tower. Operators should announce intentions on CTAF (122.8) and be aware of small GA traffic. Check FAA UAS Facility Maps for any airspace changes.
- The South Umpqua River flows through the east side of Roseburg. The North Umpqua River joins the South Umpqua just west of the city. The rivers have active recreational traffic including fishing, kayaking, and rafting. The Umpqua River system is one of Oregon's major river systems. Maintain visual line of sight and avoid flying directly over people on the river.
- Stewart Park and the Douglas County Fairgrounds have high visitor traffic. Roseburg Parks and Recreation and Douglas County require permits for commercial drone takeoff and landing on park property. The Douglas County Fair is a major annual event drawing large crowds. Stewart Park is heavily used for sports, events, and community gatherings.
- The surrounding area is heavily forested with timber industry operations. Wildfire season in late summer can create TFRs (Temporary Flight Restrictions) over nearby forest fires. The area is fire-prone from July through October. Check NOTAMs before flying during fire season. The Umpqua National Forest is east of Roseburg.
- The VA Southern Oregon Rehabilitation Center and Clinics campus has federal facilities. Drone flights near federal facilities may have restrictions. The campus is a major employer in Roseburg. Avoid flying near federal buildings without proper authorization.
Local Ordinances
Roseburg requires a business license for commercial drone operations. Roseburg Parks and Recreation and Douglas County require permits for commercial drone takeoff and landing in city and county parks, including Stewart Park and the Douglas County Fairgrounds. The city prohibits drone operations that endanger public safety or violate privacy under Roseburg Municipal Code 5.08. RBG (Roseburg Regional Airport) is uncontrolled but has active GA traffic. The Umpqua National Forest east of Roseburg requires US Forest Service permits for commercial drone operations. Oregon state law (ORS 837.300-.340) governs privacy protections and surveillance restrictions statewide.
All drone operations in Roseburg must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Roseburg airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Roseburg, OR
How much does a drone topographic data collection cost in Roseburg?
Drone topographic data collection projects in Roseburg typically range from $800 to $2,800 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Roseburg, OR
Do I need LAANC authorization to fly a drone in Roseburg?
Roseburg is in Class G uncontrolled airspace. RBG (Roseburg Regional Airport) is uncontrolled with no tower, so no LAANC authorization is needed. MFR Class C airspace is 70 miles south and does not affect Roseburg. Operators should announce intentions on CTAF (122.8) when near RBG and be aware of small GA traffic. Check FAA UAS Facility Maps for any airspace changes.
What construction projects are driving aerial imaging demand in Roseburg?
Mercy Medical Center has facility expansion projects. Roseburg Forest Products headquarters drives corporate facility needs. The downtown Roseburg area has ongoing renovation and commercial improvement. The Harvard Avenue and Highway 99 commercial corridors have active development. Residential construction is strong in the northeast and southwest Roseburg areas. Infrastructure includes Highway 99 and I-5 interchange improvements and the Garden Valley Boulevard corridor project.
Can I fly a drone near the Umpqua River in Roseburg?
The South Umpqua River flows through the east side of Roseburg, and the North Umpqua River joins the South Umpqua just west of the city. The rivers have active recreational traffic including fishing, kayaking, and rafting. The Umpqua River system is one of Oregon's major river systems. Maintain visual line of sight and avoid flying directly over people on the river. Stewart Park along the river requires permits for commercial drone takeoff and landing.
How does wildfire season affect drone operations in Roseburg?
The Roseburg area is heavily forested with timber industry operations and is fire-prone from July through October. Wildfire season in late summer can create TFRs (Temporary Flight Restrictions) over nearby forest fires in the Umpqua National Forest. Check NOTAMs before flying during fire season. The Bureau of Land Management and US Forest Service manage surrounding lands and may restrict drone operations during fire season. The timber industry also creates demand for aerial forestry data collection and inventory work.
How much does an aerial imaging cost in Roseburg?
Topographic data collection projects in Roseburg range from $800 to $2,800. LiDAR scanning costs $1,800 to $5,200. Construction monitoring runs $600 to $2,300. Roseburg pricing is lower than Portland and Eugene, reflecting the smaller market. Mercy Medical Center expansion, downtown renovation, and residential construction drive steady demand. The timber industry creates additional demand for aerial forestry data collection and inventory work.
All Aerial Imaging Services in Roseburg, OR
Compare pricing across all aerial imaging services available in Roseburg, Oregon.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $800 | $2,800 | 3-5 days |
| Drone Inspection | $450 | $1,900 | 2-4 days |
| LiDAR Scanning | $1,800 | $5,200 | 4-8 days |
| Environmental Monitoring | $900 | $3,300 | 3-6 days |
| Aerial Imagery | $300 | $1,000 | 1-2 days |
| Construction Monitoring | $600 | $2,300 | 2-5 days |
| Real Estate Photography | $230 | $850 | 1-2 days |
| Roof Inspection | $230 | $850 | 1-2 days |
Pricing ranges are based on market data for Roseburg. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Roseburg, OR
Are You a Drone Operator in Roseburg, OR?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Roseburg and the surrounding Roseburg area.
Apply to Join