Topographic Data Collection in Tacoma, WA
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Pierce County & the Seattle-Tacoma-Bellevue, WA Metro Area area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Tacoma, WA
Low End
$225
High End
$2,200
Turnaround
3-5 business days
Cost ranges are based on market data for Seattle-Tacoma-Bellevue, WA Metro Area. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Tacoma
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Tacoma. Here's what's driving demand:
Tacoma's construction market is experiencing strong growth with approximately $2.5 billion in active and planned projects. Major developments include the $500 million Foss Waterway Seaport redevelopment, the $200 million Hilltop Tacoma Link light rail extension completed in 2023, and ongoing revitalization of downtown Tacoma's Convention Center district. The Port of Tacoma is investing over $400 million in terminal modernization and expansion. JBLM's ongoing military construction projects contribute an additional $1 billion+ to the regional construction economy.
Major Developers Active in the Area:
Washington drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Tacoma meets all federal and state requirements.
Drone Regulations in Tacoma, WA
Airports & LAANC Zones
- SEA (KSEA) — Seattle-Tacoma International Airport — Class B airspace — SEA-TAC is partially in Tacoma's metro area, Class B extends over northern Tacoma
- TIW (KTIW) — Tacoma Narrows Airport — Class D airspace — Located in west Tacoma near the Narrows Bridge, busy general aviation airport
- TCM (KTCM) — McChord Field/Joint Base Lewis-McChord — Class D airspace and restricted areas — Military airfield, heavy C-17 cargo operations, strict coordination required
- GRF (KGRF) — Gray Army Airfield/JBLM — Class D airspace — Military airfield on Joint Base Lewis-McChord, restricted operations
Restricted Airspace
- SEA-TAC Class B airspace extends over northern Tacoma and Federal Way areas
- Joint Base Lewis-McChord (JBLM) restricted airspace R-5701, R-5702, R-5703 — military operations area, drone flights prohibited without coordination
- McChord Field (KTCM) Class D airspace covers southwest Tacoma
- Mount Rainier National Park — drone flights prohibited under NPS regulations (36 CFR 1.5), located approximately 40 miles southeast
- Tacoma Narrows Airport (KTIW) Class D airspace covers west Tacoma and Gig Harbor area
- Temporary Flight Restrictions frequent near JBLM for military operations and presidential visits to Seattle area
Local Ordinances
Tacoma Municipal Code Chapter 8.30 regulates unmanned aircraft systems within city limits. TMC 8.30.020 prohibits drone takeoff or landing in city parks without prior authorization from the Metropolitan Park District. Commercial drone operators must obtain a City of Tacoma business license per TMC Title 5. Film permits for commercial drone work on public property are administered through the City of Tacoma's Community and Economic Development department, with application fees of $100 per TMC 5.22. The city requires proof of FAA Part 107 certification for all commercial operations and compliance with FAA Part 107 operating rules.
All drone operations in Tacoma must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Tacoma airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Tacoma, WA
How much does a drone topographic data collection cost in Tacoma?
Drone topographic data collection projects in Tacoma typically range from $225 to $2,200 with 3-5 business days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Tacoma, WA
How does Joint Base Lewis-McChord affect drone operations in Tacoma?
JBLM has extensive restricted airspace (R-5701, R-5702, R-5703) and two Class D airfields (McChord Field KTCM and Gray Army Airfield KGRF) south of Tacoma. Drone flights near these areas require careful planning, and operations within restricted areas are generally prohibited without military coordination. Always check current TFRs and NOTAMs before flying.
Can I fly a drone in Tacoma city parks?
Tacoma Municipal Code 8.30.020 prohibits drone takeoff or landing in city parks without prior authorization from the Metropolitan Park District of Tacoma. Contact Metro Parks Tacoma to apply for a special use permit for commercial or research drone operations.
What aerial imaging services are most in demand in Tacoma?
Topographic data collection projects for the Foss Waterway redevelopment, construction progress monitoring for the Hilltop area revitalization, and infrastructure inspections for the Port of Tacoma's $400 million modernization are the most common requests. JBLM-related environmental data collection projects also drive demand.
Do I need LAANC authorization to fly in Tacoma?
Yes. Northern Tacoma falls within SEA-TAC Class B airspace, and areas near Tacoma Narrows Airport (KTIW) and McChord Field (KTCM) are Class D airspace. LAANC authorization is required for all flights within these controlled airspace boundaries.
How do Tacoma aerial imaging costs compare to Seattle?
Tacoma aerial imaging pricing is approximately 10-15% lower than Seattle due to slightly lower operating costs, but still above the national average. 3D scans range from $750 to $5,500, and topographic data collection from $225 to $2,200.
All Aerial Imaging Services in Tacoma, WA
Compare pricing across all aerial imaging services available in Tacoma, Washington.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $225 | $2,200 | 3-5 business days |
| Drone Inspection | $375 | $3,200 | 2-4 business days |
| LiDAR Scanning | $750 | $5,500 | 5-7 business days |
| Environmental Monitoring | $325 | $2,800 | 3-5 business days |
| Aerial Imagery | $175 | $1,600 | 1-3 business days |
| Construction Monitoring | $275 | $1,800 | 1-3 business days |
| Real Estate Photography | $125 | $700 | 1-2 business days |
| Roof Inspection | $175 | $650 | 1-2 business days |
Pricing ranges are based on market data for Seattle-Tacoma-Bellevue, WA Metro Area. Actual costs depend on project scope, site conditions, and required deliverables.
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Tacoma, WA?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Tacoma and the surrounding Seattle-Tacoma-Bellevue, WA Metro Area area.
Apply to Join