Aerial Imagery in Clovis, CA

Professional aerial photography and orthomosaic mapping. High-resolution geo-referenced imagery for real estate, marketing, and documentation.

$150–$450 | 1-2 days

Serving Fresno County & the Fresno-Clovis area

Request a Free Quote
Drone conducting aerial imagery in Clovis, California — professional aerial survey services

Get Matched With a Local Surveyor

Aerial Imagery Pricing in Clovis, CA

Low End

$150

High End

$450

Turnaround

1-2 days

Cost ranges are based on market data for Fresno-Clovis. Actual pricing depends on site size, complexity, and deliverables.

Common Aerial Imagery Applications in Clovis

  • Real estate marketing imagery
  • Event and venue photography
  • Construction progress documentation
  • Land parcel showcase imagery

Capturing Clovis from Above

Aerial imagery showcases Clovis's unique landscape and development:

Clovis is the fastest-growing city in Fresno County, driven by the Loma Vista Specific Plan (2,800 acres of master-planned development), Harlan Ranch, and the Clovis Community Medical Center expansion. The Clovis-Fresno metro is the largest urban area in the Central Valley.

From the 2,800-acre Loma Vista Specific Plan to Harlan Ranch and the Clovis Community Medical Center expansion, Fresno County's fastest-growing city is building master-planned communities at a pace that makes FAT Class C airspace coordination essential for every survey.

California drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Clovis meets all federal and state requirements.

Drone Regulations in Clovis, CA

Airports & LAANC Zones

  • FAT — Fresno Yosemite International Airport (Class C airspace, 8 miles southwest)
  • FCH — Fresno Chandler Executive Airport (Class D, downtown Fresno, 10 miles southwest)
  • O28 — Coalinga Municipal Airport (uncontrolled, 60 miles west, advisory only)

Restricted Airspace

  • Class C airspace around Fresno Yosemite International Airport (FAT) — extends approximately 5 nautical miles from the airport. LAANC authorization required for commercial drone flights within this zone. Clovis is partially within the FAT Class C shelf.
  • Class D airspace around Fresno Chandler Executive Airport (FCH) — located in downtown Fresno, approximately 10 miles southwest of Clovis. Requires LAANC authorization within 4 nautical miles.
  • Sierra National Forest — drone flights are restricted in designated wilderness areas east of Clovis. Permits required from the US Forest Service for commercial operations taking off or landing on forest land.
  • Fresno County irrigation canals and water infrastructure — California AB 527 designates water treatment facilities and distribution infrastructure as critical infrastructure. Drone flights over Fresno Irrigation District facilities require operator consent.
  • Clovis Community Medical Center campus — hospital helipad creates a temporary flight restriction zone. Drone flights near the helipad require coordination with hospital security and FAA LAANC.

Local Ordinances

The City of Clovis requires a commercial drone permit for operations taking off or landing on city-owned property, including parks, the Clovis Trail System, and public facilities. The Clovis Parks and Recreation Department issues special use permits. Flights from private property (with owner permission) do not require a city permit but must comply with FAA Part 107 rules. Fresno Yosemite International Airport airspace coordination is managed through LAANC. Clovis bans drone flights over the Clovis Rodeo Grounds and Clovis High School stadium during events.

All drone operations in Clovis must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Clovis airports. Our network operators handle all permitting and airspace authorizations as part of their service.

Aerial Imagery FAQ — Clovis, CA

What resolution aerial imagery can I get in Clovis?

Our drones capture imagery at 1-5 cm ground sampling distance (GSD), meaning each pixel represents 1-5 cm on the ground. Higher resolution is available for smaller sites requiring detailed inspection.

What is an orthomosaic?

An orthomosaic is a geo-referenced aerial image created by stitching hundreds of individual photos into a single, seamless, map-accurate image. It corrects for lens distortion and terrain relief, producing a measurable, survey-grade image.

How quickly can aerial imagery be delivered in Clovis?

Standard aerial imagery projects in Clovis are delivered with 1-2 days turnaround. Orthomosaics and geo-referenced products may take additional processing time depending on data requirements.

Drone Regulations FAQ — Clovis, CA

Do I need a permit for a drone survey in Clovis?

You need a City of Clovis commercial drone permit only if you plan to take off or land on city-owned property, including parks and the Clovis Trail System. Surveys conducted from private property (with owner permission) do not require a city permit. All commercial drone operations require an FAA Part 107 Remote Pilot Certificate.

How much does a drone survey cost in the Clovis area?

Topographic surveys in the Clovis-Fresno metro typically range from $1,600 to $4,000. Roof inspections run $200-$700. LiDAR scanning for larger master-planned community sites like Loma Vista can cost $2,500-$7,500. Real estate drone photography starts at $150.

Can drones fly near Fresno Yosemite International Airport from Clovis?

Fresno Yosemite International Airport (FAT) has Class C controlled airspace that partially extends over southwest Clovis. Commercial drone flights within this airspace require LAANC authorization from the FAA. Our network surveyors handle all LAANC approvals and coordinate with FAT tower operations.

What is the Loma Vista Specific Plan and how does it affect survey demand?

The Loma Vista Specific Plan covers approximately 2,800 acres southeast of Clovis with master-planned residential, commercial, and mixed-use development. It is one of the largest active master-planned communities in the Central Valley, generating sustained demand for topographic surveys, construction monitoring, earthwork verification, and aerial documentation.

Are there restrictions near the Sierra National Forest?

Designated wilderness areas in the Sierra National Forest east of Clovis prohibit drone takeoff and landing. Commercial drone operations on non-wilderness forest land require a permit from the US Forest Service. Our surveyors coordinate with the Sierra National Forest supervisor's office for any work near forest boundaries.

How does Clovis growth compare to Fresno?

Clovis is the fastest-growing city in Fresno County, with the Loma Vista and Harlan Ranch master-planned communities driving residential expansion southeast and northeast of the city. The Temperance Avenue corridor extension is opening new development frontiers. Clovis consistently outpaces Fresno in per-capita residential building permit volume.

All Drone Survey Services in Clovis, CA

Compare pricing across all drone survey services available in Clovis, California.

Service Low End High End Turnaround
Topographic Survey $1,600 $4,000 3-5 days
Drone Inspection $250 $800 1-2 days
LiDAR Scanning $2,500 $7,500 5-7 days
Environmental Monitoring $750 $2,600 2-4 days
Aerial Imagery ← you are here $150 $450 1-2 days
Construction Monitoring $900 $2,600 Monthly
Real Estate Photography $150 $400 1-2 days
Roof Inspection $200 $700 1-2 days

Pricing ranges are based on market data for Fresno-Clovis. Actual costs depend on project scope, site conditions, and required deliverables.

Are You a Drone Surveyor in Clovis, CA?

Join our network of FAA-certified operators. Get matched with aerial imagery projects in Clovis and the surrounding Fresno-Clovis area.

Apply to Join