LiDAR Scanning in Clovis, CA
Survey-grade LiDAR scanning with point cloud deliverables in LAS/LAZ format. Penetrate vegetation for accurate terrain models in forestry, mining, and utility corridors.
Serving Fresno County & the Fresno-Clovis area
Request a Free Quote
Get Matched With a Local Surveyor
LiDAR Scanning Pricing in Clovis, CA
Low End
$2,500
High End
$7,500
Turnaround
5-7 days
Cost ranges are based on market data for Fresno-Clovis. Actual pricing depends on site size, complexity, and deliverables.
Common LiDAR Scanning Applications in Clovis
- Vegetation penetration for terrain models
- Forestry and biomass estimation
- Utility corridor mapping
- Mining and quarry volume surveys
Terrain & Airspace Considerations
LiDAR surveying in Clovis requires airspace awareness alongside active project demand:
Clovis is the fastest-growing city in Fresno County, driven by the Clovis General Plan expansion into the Harlan Ranch and Loma Vista areas. The Loma Vista Specific Plan covers approximately 2,800 acres of master-planned residential, commercial, and mixed-use development southeast of the city. The Clovis Community Medical Center expansion is a major institutional construction project. Old Town Clovis continues to see infill commercial development along Clovis Avenue. The Temperance Avenue corridor extension is opening new development frontiers. Residential tract construction in northeast Clovis is among the highest volume in the Central Valley.
Restricted Airspace in Clovis:
- Class C airspace around Fresno Yosemite International Airport (FAT) — extends approximately 5 nautical miles from the airport. LAANC authorization required for commercial drone flights within this zone. Clovis is partially within the FAT Class C shelf.
- Class D airspace around Fresno Chandler Executive Airport (FCH) — located in downtown Fresno, approximately 10 miles southwest of Clovis. Requires LAANC authorization within 4 nautical miles.
- Sierra National Forest — drone flights are restricted in designated wilderness areas east of Clovis. Permits required from the US Forest Service for commercial operations taking off or landing on forest land.
- Fresno County irrigation canals and water infrastructure — California AB 527 designates water treatment facilities and distribution infrastructure as critical infrastructure. Drone flights over Fresno Irrigation District facilities require operator consent.
- Clovis Community Medical Center campus — hospital helipad creates a temporary flight restriction zone. Drone flights near the helipad require coordination with hospital security and FAA LAANC.
California drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Clovis meets all federal and state requirements.
Drone Regulations in Clovis, CA
Airports & LAANC Zones
- FAT — Fresno Yosemite International Airport (Class C airspace, 8 miles southwest)
- FCH — Fresno Chandler Executive Airport (Class D, downtown Fresno, 10 miles southwest)
- O28 — Coalinga Municipal Airport (uncontrolled, 60 miles west, advisory only)
Restricted Airspace
- Class C airspace around Fresno Yosemite International Airport (FAT) — extends approximately 5 nautical miles from the airport. LAANC authorization required for commercial drone flights within this zone. Clovis is partially within the FAT Class C shelf.
- Class D airspace around Fresno Chandler Executive Airport (FCH) — located in downtown Fresno, approximately 10 miles southwest of Clovis. Requires LAANC authorization within 4 nautical miles.
- Sierra National Forest — drone flights are restricted in designated wilderness areas east of Clovis. Permits required from the US Forest Service for commercial operations taking off or landing on forest land.
- Fresno County irrigation canals and water infrastructure — California AB 527 designates water treatment facilities and distribution infrastructure as critical infrastructure. Drone flights over Fresno Irrigation District facilities require operator consent.
- Clovis Community Medical Center campus — hospital helipad creates a temporary flight restriction zone. Drone flights near the helipad require coordination with hospital security and FAA LAANC.
Local Ordinances
The City of Clovis requires a commercial drone permit for operations taking off or landing on city-owned property, including parks, the Clovis Trail System, and public facilities. The Clovis Parks and Recreation Department issues special use permits. Flights from private property (with owner permission) do not require a city permit but must comply with FAA Part 107 rules. Fresno Yosemite International Airport airspace coordination is managed through LAANC. Clovis bans drone flights over the Clovis Rodeo Grounds and Clovis High School stadium during events.
All drone operations in Clovis must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Clovis airports. Our network operators handle all permitting and airspace authorizations as part of their service.
LiDAR Scanning FAQ — Clovis, CA
What is LiDAR scanning and how is it used in Clovis?
LiDAR (Light Detection and Ranging) uses laser pulses to create precise 3D point clouds of terrain and structures. In Clovis, it is used for surveying vegetated areas, utility corridors, mining sites, and forestry where photogrammetry cannot penetrate canopy.
What deliverables does LiDAR produce?
LiDAR scanning delivers classified point clouds in LAS/LAZ format, digital elevation models (DEM), digital surface models (DSM), and cross-section profiles. Data is geo-referenced and compatible with all major GIS and CAD platforms.
How accurate is drone LiDAR?
Drone-mounted LiDAR typically achieves 1-3 cm horizontal accuracy and 2-5 cm vertical accuracy with proper ground control. RTK-corrected systems can deliver sub-centimeter precision for survey-grade applications.
Drone Regulations FAQ — Clovis, CA
Do I need a permit for a drone survey in Clovis?
You need a City of Clovis commercial drone permit only if you plan to take off or land on city-owned property, including parks and the Clovis Trail System. Surveys conducted from private property (with owner permission) do not require a city permit. All commercial drone operations require an FAA Part 107 Remote Pilot Certificate.
How much does a drone survey cost in the Clovis area?
Topographic surveys in the Clovis-Fresno metro typically range from $1,600 to $4,000. Roof inspections run $200-$700. LiDAR scanning for larger master-planned community sites like Loma Vista can cost $2,500-$7,500. Real estate drone photography starts at $150.
Can drones fly near Fresno Yosemite International Airport from Clovis?
Fresno Yosemite International Airport (FAT) has Class C controlled airspace that partially extends over southwest Clovis. Commercial drone flights within this airspace require LAANC authorization from the FAA. Our network surveyors handle all LAANC approvals and coordinate with FAT tower operations.
What is the Loma Vista Specific Plan and how does it affect survey demand?
The Loma Vista Specific Plan covers approximately 2,800 acres southeast of Clovis with master-planned residential, commercial, and mixed-use development. It is one of the largest active master-planned communities in the Central Valley, generating sustained demand for topographic surveys, construction monitoring, earthwork verification, and aerial documentation.
Are there restrictions near the Sierra National Forest?
Designated wilderness areas in the Sierra National Forest east of Clovis prohibit drone takeoff and landing. Commercial drone operations on non-wilderness forest land require a permit from the US Forest Service. Our surveyors coordinate with the Sierra National Forest supervisor's office for any work near forest boundaries.
How does Clovis growth compare to Fresno?
Clovis is the fastest-growing city in Fresno County, with the Loma Vista and Harlan Ranch master-planned communities driving residential expansion southeast and northeast of the city. The Temperance Avenue corridor extension is opening new development frontiers. Clovis consistently outpaces Fresno in per-capita residential building permit volume.
All Drone Survey Services in Clovis, CA
Compare pricing across all drone survey services available in Clovis, California.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Survey | $1,600 | $4,000 | 3-5 days |
| Drone Inspection | $250 | $800 | 1-2 days |
| LiDAR Scanning ← you are here | $2,500 | $7,500 | 5-7 days |
| Environmental Monitoring | $750 | $2,600 | 2-4 days |
| Aerial Imagery | $150 | $450 | 1-2 days |
| Construction Monitoring | $900 | $2,600 | Monthly |
| Real Estate Photography | $150 | $400 | 1-2 days |
| Roof Inspection | $200 | $700 | 1-2 days |
Pricing ranges are based on market data for Fresno-Clovis. Actual costs depend on project scope, site conditions, and required deliverables.
Are You a Drone Surveyor in Clovis, CA?
Join our network of FAA-certified operators. Get matched with lidar scanning projects in Clovis and the surrounding Fresno-Clovis area.
Apply to Join