Topographic Data Collection in Erie, CO
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Boulder County & the Denver-Aurora-Lakewood MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Erie, CO
Low End
$1,500
High End
$5,000
Turnaround
3-5 days
Cost ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Erie
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Erie. Here's what's driving demand:
Erie is one of the fastest-growing municipalities in Colorado, with annual growth rates of 4-5% and building permit volume routinely exceeding 400-500 new residential units per year. Major infrastructure investments include the Erie Parkway expansion, a new water treatment facility, and the Erie Recreation Center expansion. The town has approved multiple master-planned communities totaling thousands of new residential units, with continued investment in schools, fire stations, and utility infrastructure along the Colorado 7 corridor.
Major Developers Active in the Area:
Colorado drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Erie meets all federal and state requirements.
Drone Regulations in Erie, CO
Airports & LAANC Zones
- DEN — Denver International Airport (Class B, 30 miles southeast; outer shelves at 10,000-12,000 MSL)
- BJC — Rocky Mountain Metropolitan Airport (Class D, 12 miles south; shelf partially covers southern Erie)
- LMO — Vance Brand Airport (Class E, non-towered, 8 miles north in Longmont)
- 1V5 — Boulder Municipal Airport (Class E, non-towered, 14 miles west)
Restricted Airspace
- KBJC Class D surface area to 8,000 MSL within approximately 4.5 nm. Southern portion of Erie falls within or near this Class D shelf. LAANC authorization required for flights in this area.
- KDEN Class B outer shelves at 10,000-12,000 MSL. Standard drone operations below 400 AGL not impacted.
- Rocky Flats National Wildlife Refuge (8 miles south between Erie and Broomfield). Former nuclear weapons production site; USFWS restrictions on overflights.
- Erie sits on the Wattenberg Gas Field; numerous well pads and production facilities throughout the area. FAA may issue TFRs around critical energy infrastructure.
- Boulder County Open Space parcels adjacent to Erie have restrictions on drone operations per county regulations.
Local Ordinances
Erie Municipal Code Chapter 11 prohibits drones from taking off or landing in town parks without prior authorization from the Parks and Recreation Department. Commercial operators must provide proof of FAA Part 107 certification and liability insurance. Erie Municipal Code Section 11-2-30 addresses operation of unmanned aircraft on town property, requiring compliance with all FAA regulations. Commercial filming including drone cinematography requires a film permit from the Town Clerk office with fee approximately $100 per day.
All drone operations in Erie must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Erie airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Erie, CO
How much does a drone topographic data collection cost in Erie?
Drone topographic data collection projects in Erie typically range from $1,500 to $5,000 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Erie, CO
How does the proximity to Rocky Mountain Metropolitan Airport (KBJC) affect drone operations in Erie?
The KBJC Class D airspace extends to 8,000 feet MSL within approximately 4.5 nautical miles of the airport. The southern portion of Erie falls within or near this Class D shelf, meaning commercial drone pilots operating in that area must obtain LAANC authorization before flying. Flights in the northern portions of Erie are generally outside Class D but should still check current airspace via the B4UFLY app or LAANC providers.
What major construction projects are driving aerial imaging demand in Erie?
The Colliers Hill master-planned community by Shea Homes is one of the largest residential developments in Boulder County, with over 2,700 planned units requiring ongoing topographic data collection, construction monitoring, and earthwork verification. Additionally, the Erie Commons mixed-use development and Erie Parkway corridor improvements generate consistent demand for aerial mapping and progress documentation.
Are there restrictions on flying drones in Erie parks?
Yes. Erie Municipal Code prohibits drone takeoff and landing in town parks without prior authorization from the Parks and Recreation Department. Commercial operators must provide proof of FAA Part 107 certification and liability insurance. Operators should contact the town for a use permit before conducting data collection projects in park areas.
How do oil and gas operations in the Erie area impact aerial imaging planning?
Erie sits above the Wattenberg Gas Field, with numerous active well pads and production facilities throughout the area. The FAA may issue temporary flight restrictions around critical energy infrastructure. Drone operators should verify current TFRs before flying near oil and gas sites and coordinate with site operators when aerial imaging adjacent properties.
Do I need a film permit for commercial drone photography in Erie?
Yes. Under Erie business regulations for commercial filming, any commercial filming activity including drone cinematography requires a film permit from the Town Clerk office. The permit fee is approximately $100 per day, and operators must show proof of FAA Part 107 certification and liability insurance coverage.
All Aerial Imaging Services in Erie, CO
Compare pricing across all aerial imaging services available in Erie, Colorado.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,500 | $5,000 | 3-5 days |
| Drone Inspection | $800 | $3,500 | 2-4 days |
| LiDAR Scanning | $3,000 | $12,000 | 5-7 days |
| Environmental Monitoring | $1,200 | $5,000 | 3-5 days |
| Aerial Imagery | $400 | $2,000 | 1-3 days |
| Construction Monitoring | $1,000 | $4,500 | 2-4 days |
| Real Estate Photography | $300 | $1,500 | 1-2 days |
| Roof Inspection | $250 | $1,200 | 1-3 days |
Pricing ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Erie, CO?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Erie and the surrounding Denver-Aurora-Lakewood MSA area.
Apply to Join