Topographic Survey in Jacksonville, FL
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Duval County & the Jacksonville MSA area
Request a Free Quote
Get Matched With a Local Surveyor
Topographic Survey Pricing in Jacksonville, FL
Low End
$1,600
High End
$5,500
Turnaround
3-7 days
Cost ranges are based on market data for Jacksonville MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Survey Applications in Jacksonville
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline surveys
- Drainage and grading design support
Construction & Development Projects
Topographic surveys are essential for site planning in Jacksonville. Here's what's driving demand:
Jacksonville is the largest city by area in the contiguous US and is experiencing growth driven by its deep-water port, logistics industry, and corporate relocations. Major projects include the Jacksonville Shipyards redevelopment on the Northbank, the Laura Street trio revitalization downtown, the Pearl Street residential tower, and the St. Johns Town Center expansion. The port of Jacksonville (JAXPORT) is investing in terminal expansions for auto and container operations. Infrastructure projects include the I-95/I-10 interchange reconstruction, the Buckman Bridge widening study, and the First Coast Expressway extension.
Major Developers Active in the Area:
Florida drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Jacksonville meets all federal and state requirements.
Drone Regulations in Jacksonville, FL
Airports & LAANC Zones
- JAX — Jacksonville International Airport (Class B airspace)
- CRG — Jacksonville Executive at Craig Airport (Class D airspace)
- HEF — Herlong Airport (Class D airspace)
- NIP — Jacksonville Naval Air Station (Class C airspace)
- CTI — Cecil Airport (Class D airspace, former NAS Cecil Field)
Restricted Airspace
- Class B airspace around Jacksonville International (JAX) extends approximately 10 NM radius, surface to 10,000 ft MSL. LAANC required for all commercial drone operations within this zone.
- Naval Air Station Jacksonville (NIP) has Class C airspace on the west side of the St. Johns River. The base hosts P-8 Poseidon operations and has active military airspace. Coordinate with base operations for flights within 5 NM.
- Mayport Naval Station approximately 20 NM east of downtown has restricted military airspace and frequent Coast Guard operations.
- Cecil Airport (CTI), a former Naval Air Station, retains some restricted areas and operates as a commercial spaceport with FAA-licensed launch corridors.
- Timucuan Ecological and Historical Preserve restricts drone takeoff and landing without NPS permits.
Local Ordinances
The City of Jacksonville requires a permit for commercial drone takeoff and landing on city property, including public parks, beaches, and the Jacksonville Beach pier area. Duval County regulations apply to the consolidated city-county. Naval Air Station Jacksonville maintains restricted airspace on the west side. Mayport Naval Station restricts coastal drone operations east of the St. Johns River mouth. The Jacksonville Film Commission issues permits for drone filming in public rights-of-way.
All drone operations in Jacksonville must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Jacksonville airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Survey FAQ — Jacksonville, FL
How much does a drone topographic survey cost in Jacksonville?
Drone topographic surveys in Jacksonville typically range from $1,600 to $5,500 with 3-7 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic surveys?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a survey report with accuracy metrics.
Drone Regulations FAQ — Jacksonville, FL
Do I need LAANC authorization to fly a drone near Jacksonville International Airport?
Yes. JAX has Class B airspace extending approximately 10 nautical miles from the airport. Most of northern Jacksonville falls within this controlled airspace. All commercial drone operations require LAANC authorization through the FAA before flying.
Can I fly a drone near Naval Air Station Jacksonville?
NAS Jacksonville has Class C airspace on the west side of the St. Johns River. Drone operations within 5 nautical miles require coordination with base operations. The base hosts P-8 Poseidon maritime patrol aircraft and has active TFRs during military exercises. Always check the FAA TFR database.
What is the cost of a drone survey for a construction site in Jacksonville?
Topographic drone surveys in Jacksonville typically range from $1,600 to $5,500 depending on acreage. Construction monitoring visits cost $450 to $2,500 per session. LiDAR scanning for detailed terrain mapping runs $2,800 to $10,000. Jacksonville's large land area and varied terrain create a wide cost range.
Are there restrictions on flying drones over Jacksonville Beach?
Commercial drone operations at Jacksonville Beach require a permit from the City of Jacksonville Beach. The beach area may fall within approach corridors for Mayport Naval Station. Flying over crowded beaches violates FAA Part 107 safety guidelines. Check for active TFRs related to Coast Guard operations.
Can I fly a drone over the Timucuan Ecological Preserve?
The Timucuan Ecological and Historical Preserve prohibits drone takeoff and landing without a special use permit from the National Park Service. The preserve encompasses over 46,000 acres of wetlands and cultural sites. Commercial filming permits are available through the NPS permitting office.
Does Florida require a separate state drone license?
No. Florida relies on the FAA Part 107 Remote Pilot Certificate for commercial operations. The state does not issue a separate drone license, but operators must comply with Florida Statutes 934.50 privacy restrictions and obtain local permits for takeoff and landing on public property.
All Drone Survey Services in Jacksonville, FL
Compare pricing across all drone survey services available in Jacksonville, Florida.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Survey ← you are here | $1,600 | $5,500 | 3-7 days |
| Drone Inspection | $500 | $3,000 | 1-3 days |
| LiDAR Scanning | $2,800 | $10,000 | 5-10 days |
| Environmental Monitoring | $800 | $4,000 | 2-5 days |
| Aerial Imagery | $350 | $1,800 | 1-2 days |
| Construction Monitoring | $450 | $2,500 | 1-3 days per visit |
| Real Estate Photography | $200 | $1,000 | 1-2 days |
| Roof Inspection | $300 | $1,300 | 1-2 days |
Pricing ranges are based on market data for Jacksonville MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Other Drone Survey Services in Jacksonville, FL
Topographic Survey in Nearby Cities
Are You a Drone Surveyor in Jacksonville, FL?
Join our network of FAA-certified operators. Get matched with topographic survey projects in Jacksonville and the surrounding Jacksonville MSA area.
Apply to Join