Aerial Imaging Services in Maryville, TN
Maryville at golden hour with the Blount County Courthouse, the Foothills Mall commercial corridor, and the Great Smoky Mountains visible to the south, with residential subdivisions along the Highway 411 corridor.
Maryville (Tennessee) is part of the Knoxville, TN MSA and has a population of approximately 30,000. Maryville is the Blount County seat and gateway to the Great Smoky Mountains. Its position directly south of McGhee Tyson Airport places the entire city within Class C airspace, requiring LAANC authorization for all commercial drone operations.
Serving Blount & the Knoxville, TN MSA area
Request a Free Quote
Get a Maryville Aerial Quote
Drone Services Serving Maryville, TN
Maryville is the Blount County seat and gateway to the Great Smoky Mountains. Its position directly south of McGhee Tyson Airport places the entire city within Class C airspace, requiring LAANC authorization for all commercial drone operations.
Aerial Imaging Pricing Across Tennessee
Cost ranges are based on market data for Knoxville, TN MSA. Actual pricing depends on site size, complexity, and deliverables.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,125 | $4,100 |
| Drone Inspection | $200 | $1,700 |
| LiDAR Scanning | $1,900 | $7,550 |
| Environmental Monitoring | $675 | $2,700 |
| Aerial Imagery | $150 | $1,000 |
| Construction Monitoring | $350 | $1,650 |
| Real Estate Photography | $175 | $700 |
| Roof Inspection | $250 | $900 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Maryville? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Drone Regulations & Airspace Rules for Maryville
FAA Part 107 Requirements
Flying for hire in Maryville? That is commercial operation under FAA Part 107, which requires a Remote Pilot Certificate — a credential we verify for every operator.
State Drone Laws
Commercial drone work in Maryville follows Tennessee UAS law (Tennessee SB 2106, HB 153, SB 1892, SB 1777, SB 796, HB 2376 (2013-2016)), with city-level rules on top: The City of Maryville does not maintain a dedicated municipal drone ordinance. Full Tennessee drone law →
Local Ordinances
The City of Maryville does not maintain a dedicated municipal drone ordinance. Commercial operators follow FAA Part 107 rules and Tennessee state law. Commercial takeoff and landing from Maryville city parks should be coordinated with the Maryville Parks and Recreation Department. Greenbelt Park and the Blount County Memorial Park are recreational facilities where drone operations should be coordinated with city staff. Maryville College is a private campus where commercial drone operations should be coordinated with campus security. Operators working near the Blount Memorial Hospital campus should notify hospital security. The McGhee Tyson Air National Guard Base is immediately north of Maryville and requires coordination with base security for operations near the installation boundary.
Restricted Airspace
- Maryville is directly south of McGhee Tyson Airport (TYS) and partially within the Class C airspace. The Class C surface area extends approximately 5 NM radius from TYS with surface area from 2,700 ft MSL to 10,000 ft MSL, which covers the northern portion of Maryville. The outer ring (10 NM radius) covers all of Maryville. LAANC authorization is required for commercial drone operations within the Class C surface area and outer ring.
- McGhee Tyson Air National Guard Base is co-located with TYS. The base is a military installation with security zones. Tennessee SB 2106 designates military installations as critical infrastructure with a 250-foot buffer. Operators should maintain awareness of military aircraft traffic and coordinate with base security for any commercial operations near the installation boundary.
- The Class C airspace makes Maryville one of the more restrictive areas in the Knoxville metro for commercial drone operations. Operators should check the FAA UAS Facility Maps for exact boundaries between the surface area and the outer ring, as authorization requirements differ.
Airports in the area: TYS — McGhee Tyson Airport (Class C airspace, approximately 3 NM north), DKX — Knoxville Downtown Island Airport (uncontrolled, approximately 15 NM north), OQT — Oak Ridge Airport (uncontrolled, approximately 20 NM northwest)
How Maryville Builders Use Aerial Data
Maryville is the county seat of Blount County and the gateway to the Great Smoky Mountains from the Knoxville side. The city has steady residential and commercial construction driven by its position as a growing suburban community south of Knoxville. Residential development includes single-family subdivisions expanding along the Highway 411 and Alcoa Highway corridors, serving both the local workforce and Knoxville commuters. Commercial development is concentrated along the Highway 411 corridor and the Foothills Mall area, with retail centers, medical offices, and restaurants. Blount Memorial Hospital has undergone expansion phases. Maryville College and the nearby Pellissippi State Community College generate institutional construction demand. Infrastructure projects include road improvements along Alcoa Highway (US-129), water and sewer extensions for the growing eastern residential areas, and the continued development of the Maryville-Alcoa greenway trail system.
Active Developers in the Area:
- Buddy Buck Construction (residential subdivisions along Highway 411 corridor)
- Blount Memorial Hospital (medical campus expansion)
- DFA Development (commercial and retail along Alcoa Highway corridor)
Why Hire Through Aerius View in Maryville, TN?
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Maryville
Based in the Knoxville, TN MSA and fluent in Tennessee drone law, with 7 nearby Maryville service communities in reach.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
A local operator contacts you within 2 business days — typical for Knoxville, TN MSA jobs.
AeriusView is expanding in Maryville, TN
Maryville is an expansion market for the network, with demand driven by projects from Buddy Buck Construction and other local builders. Submit here and a verified operator covering Blount is assigned.
Request a QuoteDrone Data Deliverables for Maryville Projects
These are the files you receive with a Maryville booking — all compatible with standard construction and engineering software. Projects like those delivered for Buddy Buck Construction across Blount need data that drops straight into their workflow.
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Progress reports with side-by-side comparisons for construction monitoring
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- DEM/DSM terrain models for cut/fill and grade analysis
- Coordinate systems matched to your project datum — the Tennessee State Plane zone, UTM, or a local datum your surveyor specifies
Insurance & Liability Protection
Pilot Insurance Required
Every operator matched to a Maryville project carries active liability insurance — minimum $1,000,000 general liability, verified from the certificate before the pilot joins the network. The City of Maryville does not maintain a dedicated municipal drone ordinance. Commercial operators follow FAA Part 107 rules and Tennessee state law. Commercial takeoff and landing from Maryville city parks should be coordinated with the Maryville Parks and Recreation Department. Greenbelt Park and the Blount County Memorial Park are recreational facilities where drone operations should be coordinated with city staff. Maryville College is a private campus where commercial drone operations should be coordinated with campus security. Operators working near the Blount Memorial Hospital campus should notify hospital security. The McGhee Tyson Air National Guard Base is immediately north of Maryville and requires coordination with base security for operations near the installation boundary.
FAA Part 107 Verified
Each pilot's Remote Pilot Certificate is checked against the FAA Airmen Inquiry before they can serve Blount bookings. Expired certificates are flagged automatically.
Equipment Documentation
Pilots register their airframes and sensors (RGB, LiDAR, thermal, multispectral) so Maryville requests route to crews with the right payload for the job.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active Maryville construction sites, including flight plans that avoid worker areas and equipment zones. The City of Maryville does not maintain a dedicated municipal drone ordinance. Commercial operators follow FAA Part 107 rules and Tennessee state law. Commercial takeoff and landing from Maryville city parks should be coordinated with the Maryville Parks and Recreation Department. Greenbelt Park and the Blount County Memorial Park are recreational facilities where drone operations should be coordinated with city staff. Maryville College is a private campus where commercial drone operations should be coordinated with campus security. Operators working near the Blount Memorial Hospital campus should notify hospital security. The McGhee Tyson Air National Guard Base is immediately north of Maryville and requires coordination with base security for operations near the installation boundary.
Drone Services FAQ for Maryville, TN
Do I need LAANC authorization to fly a drone in Maryville?
Yes. Maryville is directly south of McGhee Tyson Airport (TYS) and falls within the Class C airspace. The surface area (5 NM radius, 2,700 ft MSL to 10,000 ft MSL) covers northern Maryville, and the outer ring (10 NM radius) covers the entire city. LAANC authorization is required for all commercial drone operations in Maryville. Apply through the FAA LAANC system before any commercial flight.
Can I fly a drone near the McGhee Tyson Air National Guard Base?
The McGhee Tyson Air National Guard Base is a military installation co-located with TYS. Tennessee SB 2106 designates military installations as critical infrastructure with a 250-foot buffer. Operators should coordinate with base security for any commercial operations near the installation boundary. The base is within the Class C airspace, so LAANC authorization is required regardless. Military aircraft traffic is common in the area.
How much does an aerial imaging cost for a residential lot in Maryville?
Residential lot topographic data collection in Maryville typically cost $1,150 to $4,200 depending on lot size and terrain. Aerial photography for real estate listings ranges from $175 to $720. Construction monitoring for custom home builds runs $345 to $1,680 per visit.
Can I fly a drone over the Maryville College campus?
Maryville College is a private campus. Commercial drone operations on campus should be coordinated with campus security and administration. The campus is within the TYS Class C outer ring, so LAANC authorization is required. The campus is a common location for architectural photography and facility documentation.
What makes Maryville different from other Knoxville suburbs for drone operations?
Maryville's proximity to McGhee Tyson Airport means the entire city is within Class C airspace, making it one of the most restrictive areas in the Knoxville metro for commercial drone operations. LAANC authorization is required for all commercial flights. The McGhee Tyson Air National Guard Base adds an additional layer of security coordination. Operators should plan ahead and obtain LAANC authorization well before scheduled flights.
Aerial Imaging Terms for Maryville Projects
First aerial project in Maryville? These terms cover the deliverables local pilots will quote you. Most Maryville projects in our cost table start around $150.
Orthomosaic
A geometrically corrected aerial photo map stitched from many images.
Point Cloud
A 3D dataset of points representing the captured surface.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Volumetrics
Cut/fill and stockpile volume calculations derived from terrain models.
Are You a Drone Operator in Maryville?
Blount buyers search here — 3 active developers tracked in Maryville alone. Join the network and get matched leads. First lead free.
Ready to Start Your Project in Maryville, TN?
Tell us about your Maryville project and we route it to a vetted local pilot — free, no obligation. Projects in Blount start around $150.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.