Topographic Data Collection in Redmond, WA
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving King County & the Seattle area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Redmond, WA
Low End
$1,700
High End
$6,000
Turnaround
3-5 days
Cost ranges are based on market data for Seattle. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Redmond
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Redmond. Here's what's driving demand:
Redmond is experiencing massive construction driven by the $1 billion Microsoft campus expansion, the largest private construction project in Washington state. The expanded campus will add 17 new buildings and 2.5 million square feet. Downtown Redmond is undergoing revitalization with mixed-use development along the Redmond Central Connector. The Sound Transit East Link light rail extension is under construction through downtown. Residential permitting exceeded 1,200 new units in 2023-2024, driven by Microsoft employees and tech-sector growth. The Overlake area near Microsoft is seeing dense residential and retail development.
Major Developers Active in the Area:
Washington drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Redmond meets all federal and state requirements.
Drone Regulations in Redmond, WA
Airports & LAANC Zones
- SEA - Seattle-Tacoma International Airport (Class B, 18 miles south, commercial)
- BFI - Boeing Field/King County International (Class D, 12 miles southwest, corporate)
- S50 - Issaquah (Class G, untowered, 5 miles south, general aviation)
Restricted Airspace
- Redmond falls within the SEA Class B outer shelf (10-20 NM ring). Commercial drone flights require LAANC authorization. Use Aloft or DroneUp apps for instant approval up to 400 ft AGL.
- Microsoft Redmond campus has security zones. Drone flights over or near Microsoft facilities may require coordination with corporate security. The campus spans over 500 acres and includes restricted areas.
- Redmond City Code requires a permit for commercial drone operations taking off or landing on city property including Marymoor Park, Farrel-McWhirter Park, and Anderson Park. Permit costs $50 with 7-day processing.
- Sammamish River Trail and Redmond Watershed Preserve are managed recreation areas. Drone takeoff and landing prohibited without permit. Seasonal wildlife restrictions may apply.
- The SR 520 corridor and upcoming Sound Transit light rail construction create infrastructure inspection zones requiring WSDOT coordination.
Local Ordinances
Redmond City Code requires a Special Use Permit for commercial drone operations taking off or landing on city-owned property including Marymoor Park and Farrel-McWhirter Park. The permit costs $50 with a 7-day processing period through Redmond Parks and Recreation. Flights from private property require owner permission and FAA Part 107 compliance. Microsoft campus security zones may have additional restrictions enforced by private security. Washington ESSB 6001 governs law enforcement drone use. WSDOT permits required for drone inspections of state highways including SR 520.
All drone operations in Redmond must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Redmond airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Redmond, WA
How much does a drone topographic data collection cost in Redmond?
Drone topographic data collection projects in Redmond typically range from $1,700 to $6,000 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Redmond, WA
Do I need LAANC authorization to fly a drone in Redmond?
Yes. Redmond falls within the SEA Class B outer shelf requiring LAANC authorization for all commercial drone flights. Use the Aloft or DroneUp LAANC apps to request instant approval up to 400 ft AGL.
What is driving the construction boom in Redmond?
The $1 billion Microsoft campus expansion is the largest private construction project in Washington state, adding 17 buildings and 2.5 million square feet. The Sound Transit East Link light rail extension and downtown mixed-use development are also major drivers. Over 1,200 new housing units were permitted in 2023-2024.
Can I fly a drone over the Microsoft campus?
Microsoft campus security zones may restrict drone operations. The 500-acre campus includes areas enforced by private security. While FAA Part 107 governs airspace, coordinate with Microsoft security before flying over or near campus facilities.
Can I fly a drone over Marymoor Park?
Not without a permit. Redmond City Code requires a Special Use Permit for drone takeoff and landing from city parks including Marymoor Park. The permit costs $50 with 7-day processing through Redmond Parks and Recreation.
How much does a drone 3D scanning cost in Redmond?
3D scanning pricing in Redmond ranges from $3,600 to $9,500, reflecting the premium Seattle Eastside market. Standard topographic data collection range from $1,700 to $6,000. Construction monitoring runs $1,300 to $4,600.
All Aerial Imaging Services in Redmond, WA
Compare pricing across all aerial imaging services available in Redmond, Washington.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,700 | $6,000 | 3-5 days |
| Drone Inspection | $1,100 | $3,800 | 2-4 days |
| LiDAR Scanning | $3,600 | $9,500 | 5-10 days |
| Environmental Monitoring | $1,700 | $5,500 | 4-7 days |
| Aerial Imagery | $580 | $2,300 | 1-3 days |
| Construction Monitoring | $1,300 | $4,600 | 2-5 days |
| Real Estate Photography | $420 | $1,600 | 1-2 days |
| Roof Inspection | $480 | $1,700 | 1-2 days |
Pricing ranges are based on market data for Seattle. Actual costs depend on project scope, site conditions, and required deliverables.
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Redmond, WA?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Redmond and the surrounding Seattle area.
Apply to Join